-
napkincow7 zveřejnil aktualizaci před 4 měsíce
Tips For Replacing a Window Handle
Changing the handle on your window is a simple project that can be completed from the at-home comforts of your home. Follow these guidelines to ensure a smooth and beautiful finish.
Start by removing the screws to expose the screws within your uPVC window handle. Measure the spindle’s length to ensure that you get the correct size replacement.
1. Determine the length of the Spindle.
If you’re replacing a window handle it’s important to get the size of the spindle right. It can affect the tightness or elasticity of the handle as well as whether the handle will lock properly into the window frame. The spindle is the steel shaft that connects the handle as well as the lock within the frame of the window. The spindle is either a standard 8mm cross-section in the industry or the earlier 9mm versions. The modern industry standard is 8mm but this was not always the case. When buying a new handle it’s essential to check the measurements.
Take the handle off. This can be done easily by turning the handle in the open position and taking off two screws that hold the handle in place (which are often concealed behind plastic caps that will need to removed). Once removed you can measure from the base of the handle to the end of the spindle. This will provide you with the measurements required to buy a replacement.
There are many options when it comes time to choose a new window handle. From sleek chrome that will fit into a modern home to traditional burnished bronze that looks great in restored Georgian rooms, or the more quaint Tudor cottages with curled mongoose-tail latches. The options are endless but the most important thing is to select a style that is suitable for your home.
Espag handles are usually fitted to uPVC windows and are identical in size with 43mm centers (2 fixings). Cockspur handles can vary between 58mm and 62mm however luckily there are replacements available for both sizes. Window handles from Cadenza come in distinct dimensions because they have an angled blade which operates a multi-point lock mechanism inside the window.
Another aspect to consider when selecting a new window handle is determining what hand you need to use, which is defined by what hand you use to open the door. Inline window handles aren’t handed and can be used on right or left handed windows. Cranked window handles are handed and can only be used on windows that open in one direction.
2. Take the handle off
A window handle that is sagging is a frustrating experience, regardless of regardless of whether the handle is damaged or worn out. The good news is, you can replace a uPVC handle by yourself. You only need some basic hand tools and time to complete the process.
You must first open the window, and then ensure that it’s not locked. Then, you need to remove the screw caps that hold the handle in place. Once the screw caps are removed, you will be able remove the handle.
The handle is attached to a spindle in the window frame. The handle is held in place by a pin or a screw according to the type of handle. The most popular types of handles are inline Espagnolette handles and the cockspur handles. Both of these types of handles are utilized on casement windows, including aluminum windows. The handles can be locked by using a key to stop unauthorised access from outside. Or you can lock the handles by turning them clockwise.
To remove the handle you will need to use a flat blade screwdriver to loosen the clip that holds the handle. Once the clip is released, the handle should slide off the spindle. After the handle has been removed, you will need to measure the length of the spindle in order to make sure that the new handle is compatible with this size.
Once you have the right size, you can now screw the new handle in the correct position. You must make sure that the new handle is securely attached and that it turns in the correct direction (clockwise for open and counterclockwise for closed). It is also crucial to check that it has not been fitted upside down.
In the end, you must replace the screw cap caps. Once you have done this then you can test the handle to ensure that it functions properly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked one and back.
3. Remove the Screws
A uPVC window handle is a crucial element of any home and is usually the first thing to show signs of wear and tear or damage. This can be caused by natural factors or through regular use, or deliberate damage by opportunistic criminals who may want to open a closed window and gain entry to your property. A simple replacement can solve the issue and prevent it from happening again.
UPVC handles can also be difficult to remove when the locking mechanisms aren’t working properly. It’s usually possible to resolve the issue by replacing the multipoint locking mechanism, rather than the whole handle. This could save you money.
After removing the old handle, you will need to take off any screws that held it in place. The screws are typically located on the inside of the handle base. You may require an screwdriver to do this, and it’s crucial that you don’t over tighten, as this could cause the handle to become loose.
Then, you’ll have to find the screws or pins that secure the handle. They’re usually on the inside of the base of the handle. You’ll need a screwdriver to remove them. If you want to, you can replace the caps on the screw and test the handle to make sure it works properly.
Install the handle by adjusting the spindle to the cutout in the window mechanism. Then screw it in. If you want to replace the screw covers, make sure the handle is in a slack position and that the screws are securely fixed. After this is done, you’re done and are able to enjoy your new window handle. This should allow you to avoid costly door and window replacements in the future. Contact us if need more information on this or any aspect of your uPVC window.
4. Fit the New Handle
Whether you’re replacing a broken handle or simply making it more modern the process is easy and can be accomplished in just a few steps. Identifying the kind of window handle, measuring the length of its spindle and knowing what tools you’ll require to finish the job are crucial. Always ensure the safety of your windows and tools. It’s also important to take your time and follow the steps with care to ensure you have a working handle that is safe to use.
To begin, find the screws that hold your window handle in place. Remove them while holding the handle firmly to stop it from falling down and causing injury. Once the screws have been removed, you can put them in a safe location to be replaced in the future.
After Read Homepage have removed the handle, you are now able to install your new one. It is crucial that the handle fits perfectly to ensure that it works properly and locks the window in its place. The next step is to slide the square metal bar on the back of the handle into the hole in your window mechanism, making sure it is securely in place.
The last step is to replace the caps on the screws and then test the handle to make sure it works. If you’re not happy with the results or if your window does not open or close correctly, call our experts for help.
Almost all homes in the UK have uPVC windows and as they are, a lot of them will require to be replaced due to wear or breakage. The process is relatively straightforward and can be done by anyone with a little knowledge of DIY. The most important aspect in the success of the process is ensuring that you’re using a handle which matches your existing window in terms of dimensions and style. If you’re not sure what kind of handle you’ll need, feel free to contact our team who will be able to provide you with the possibilities available.