-
clamsoap11 zveřejnil aktualizaci před 3 měsíce, 2 týdny
Door Lock Replacement – What You Need to Know
When the locks on your door begin to show signs of wear and tear it’s recommended to replace the locks. This could be due to things like difficulty turning the lock or finding a key that doesn’t fit.
Fortunately, putting in new hardware for your door locks is actually very easy. All you need to do is follow these steps.
Deadbolt
The deadbolt is the door’s primary defense against forced entry. It is stronger and safer than the latch which activates the lock. Therefore, you’ll be sure that your new deadbolt meets your requirements. If you can, opt for a deadbolt that’s made with case hardened steel and no exposed screw heads on the outside to avoid unintentional drilling. door lock repairs witney Repair My Windows And Doors of the deadbolt must be inserted into the door frame to enhance security.
During the process of installation Make sure that the new deadbolt’s bolt is extending smoothly into the strike plate when you lock and close the door. If not, make a mortise bolt in the strike plate with the help of a wood chisel before you install the deadbolt. Make sure the latch on the doorknob is in contact with the hole for the deadbolt when you shut and lock the door, too.
Before installing the new deadbolt, check that it matches the size of the previous one. Most door locks come with a template that tells you how high above the doorknob that the bolt should be. However, it is always recommended to speak with an expert at a hardware store if you’re not sure which backset measurement is appropriate for your doors. They can guide you towards models that are compatible with your doors and the existing deadbolt opening.
After you’ve confirmed that your new bolt assembly is of the correct length, insert it into the hole of the door. Screw the faceplate of the latch into the hole if the new deadbolt has one. It is a good idea to attach the latch faceplate to the frame with the screws recommended by experts, and also.
Certain lock sets come with a “dummy” or decorative bolt, which allows you to install the keyed deadbolt and still have a working latch. If you have the option to use a dummy bolt, it should be installed using the same screws that are used to attach the faceplate of the latch. This will ensure the highest security.
Some deadbolts have a single cylinder that’s only accessible from the inside using an open thumb, while other have a double cylinder which allows keyed and unkeyed access. It is best to select an item that is commercial grade to ensure maximum security. They are usually tested to last for 250,000 cycles of open and close before being sold to homeowners.
Latch
The latch is the part of the lock that retracts the bolt to open and close the door. It’s typically held in place by screws located on the sides of the lock, but it may also be fastened to the strike plate or to the inside of the door jamb. It is crucial to replace a door latch with the correct one that matches your current hardware. You can verify this by putting the latch next to your existing hardware or you can look on the label of a replacement. Dunn Lumber carries a variety of brands, however it’s generally best to use the same brand of your existing hardware to ensure you purchase the latch that fits perfectly.
Some doors have an ahasp instead of latch. A hasp consists of straps with slots punched in it, which is able to be positioned over a staple. The staple is then nailed to the door frame or door using the help of a nail. When the door is shut, the strap is pulled down and locks it into position. Hasps are typically used in commercial buildings because it is less expensive than a deadbolt.
Locks are susceptible to wear and tear over time, just like any other mechanism that has moving parts. Sometimes the internal mechanism will begin to “stick” and become difficult to turn, requiring to replace the entire lockset. Sometimes, the handle or doorknob will break, and it is necessary to replace it as well.
If your lock is stuck, you can try using some graphite in the keyhole. You can either dust or spray it on the key, then turn the lock a couple of times to incorporate the graphite. You can also use a screwdriver to remove the knob, which will reveal the interior components and allow you to be able to see what’s happening inside.
After removing the knobs and tightening the two or three screws on the edge of the cylinder by turning them clockwise. It is also recommended to remove the faceplate and replace it. Surface-mounted rim locks have an additional set of cylinder screws on the back of the case, which must be removed, as is the cover plate.
Strike Plate
The strike plate acts as a reinforcement and upgrade to a locking system. It is affixed to the holes that are used for deadbolts or master key systems bolts. It assists in keeping intruders away by making sure that the lock’s latch is caught in the strike plate when the bolt or latch is engaged. Apart from enhancing security, a good strike plate can also enhance the life of locks.
A typical strike plate appears like a flat plate of metal with a hole or set of holes cut into it. It is fastened, usually with screws, onto the doorway’s frame to provide the latch with a place to rest in when it is closed. The strike plate has to be precisely aligned with the lockset to ensure the greatest protection against burglaries.
If a door’s strike plate is damaged, it should be replaced as soon as possible to ensure that the door is able to shut and latch properly. When replacing a strikeplate, first check that it is correctly aligned with the bolthole in the doorjamb. A simple way to do this is to put a piece of tape across the bolt hole. Then, test the latch by opening and closing the door. If the latch does not catch, remove the tape and chisel the area to ensure that the strike plate will be in line with the doorjamb.
After the area has been chiseled it is essential to use a larger bolt to fix the strike plate. They should be at least 3 inches long to ensure they are anchored securely into a stud which is behind the trim board. If you don’t install the screws that are longer, the wood in the doorjamb could split during a kickin attack by an burglar, leaving the door vulnerable.
A professional locksmith will swiftly replace a damaged or worn-out strike plate. They can also install new strike plates on doors that have never had them before. They can also modify existing strikeplates to enhance the security of a building and its aesthetics. This can help a property owner draw in tenants seeking a secure living space and peace of mind.
Keys
The key cylinder inside your lock is the part that allows the key to move pins so that the internal handle can turn. The key cylinder is also the most crucial component of your door lock as it fulfills the purpose that locks were made to protect your family, you and your possessions. Rekeying locks is a economical option than replacing them.
The process of replacing a lock is more complex than simply replacing the existing handle-lock combo or deadbolt. The entire lock must be replaced by removing the old cylinder and hardware from the door (including the handle if you have a knob-lock combo) and putting a brand new one in its place. There are numerous DIY-friendly tools that can be used to replace the door lock. However, it’s recommended to call a locksmith to make sure the job is done correctly.
Before installing a new cylinder and lock it is essential to have the right key for your home. A key that is duplicate will not work properly and could even cause the lock to fail completely, making it impossible to open. A skilled professional can assist you in avoiding this by making sure you have a working, genuine key for your home.
Next, you will need to take off the faceplate and latch plate. To remove the screws that hold them in place, you’ll require the help of a screwdriver. If the new plates will be identical to the original ones, you may wish to hold them in place to make it easier. If you must replace them, be careful not to tighten too much the screws since this can affect their grip on the door.
After removing the plates you will need to determine the measurements for your new locks. It is crucial to know your door’s dimensions before visiting the hardware store. Although many locksets today will fit a standard door thickness, it’s best to purchase them ahead of time. Be aware that doorknob locksets tend to differ in size from deadbolt locksets. Commercial models can come with a slightly larger bolt or latch.