-
chequeviolin10 zveřejnil aktualizaci před 7 měsíců, 2 týdny
Installing a cat flap might be a bit daunting however it’s actually quite simple to install with the right instructions. Find out how high you’d like the cat flap (normally, it is at belly height). Then, mark this area on your door and use the template included to help you drill.
If you have a kitten who is still a baby then gently prop the door slightly open and encourage it to pass through. Reward it when it goes through.
Measure cat flap installers is an excellent method to allow your pet to leave and come inside and out of your home whenever it likes. This can keep your cat healthy as it will ensure it gets enough exercise and will also allow it to go back inside if it is stranded in the elements during bad weather. This will reduce the amount of time you spend letting your cat go in and out, and keep your home safer by letting you know when it’s left.
However, it is important that the flap on your cat is correctly fitted to prevent your pet from being able to escape through it or be pushed through by other animals (e.g. dogs). It is important to measure the height of your pet’s belly and the width of the doorway at your home to ensure that the flap is at the correct height. You can alter the height of your flap when your cat is smaller or taller than average.
The next step is to make use of a spirit level to mark the centre of the door that you will install the flap. Using the marking as a guideline, you can use the jigsaw and cut the shape of the flap in the door. Once you have cut out the area, sand the edges of the door to create smooth surfaces. You can then drill any fixing holes required.
The process of fitting a cat flap isn’t as difficult as you may believe and it shouldn’t take more than two hours for the entire task from start to completion. However, the process can be slightly more complicated when you have to install it onto the frame of a uPVC or composite door since these doors have various thicknesses that can affect the way the holes are cut and what they are fixed to. This is the reason we recommend hiring an expert to do the job, particularly in the event that you’ve never worked with glass before.
Measure Your Cat
A cat flap will save you from hours of listening to your pet’s meow for you to let it in or out. This is especially useful if your cat is trapped inside in all weathers when you are at work.
If you are planning to install a cat flap on your door, it is crucial to determine the size of your cat prior to beginning the task. Although it might seem like an easy task, it is essential to get the measurement right or your pet will find it difficult to use.
First, ensure that your cat is calm before taking measurements. You’ll need to keep your cat in a place where they cannot move. Also, ensure that the measuring tape is flat and not curved against the body. You can get an accurate measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.
Once you have your cat’s measurement then you can examine the door to decide where to place the flap. A good tip is to position the flap in the middle of your cat’s belly because this will allow them to move through it without much effort. This will also stop the flap from making a lot of noise when it swings back and forward.
You should also take into consideration the thickness and structure of the uPVC door or composite. While all timber doors have a similar thickness to them, uPVC or composite doors are different in their overall structure. This can make the process of putting in the flap for your cat more difficult as you must ensure that the hole is the proper size.
It is also worthwhile reading through the directions that come with the cat flap kit to locate an illustration template that can be used to mark the location of the hole in the door. This will enable you to determine where the hole must be located and ensure that the template is positioned precisely on the door. Using a spirit-level to make sure that the template is flush against the door will be very helpful.
Cut the Flap
Before you can install your cat flap you need to cut the door panel in order to make a space big enough to accommodate it. This can be a tricky task and it is recommended that you seek out the assistance of a professional cat flap fitting service to complete this task in case you don’t have the knowledge or skills to complete the task yourself. It is also recommended that you consult the instructions that come with the cat flap kit to find out how to do it correctly.
To do this, you will need to take a measurement of the height of your cat’s or kitten’s belly. Use this as a reference point. A good rule of thumb is to put the flap of your cat about 10 centimeters away from the ground since this is approximately the average height of the cat’s belly. This way, your cat will be able to move through the flap comfortably and also give the other cats or neighbours who are snooping an issue when trying to enter or leave.
Once you’ve determined where the cat flap should be positioned, mark this position on the door with a pencil. Then, if your kit includes an outline of paper, place this over the door and use the marks to drill holes in every corner of the template. Then, you should be able cut out the template shape and replace it with the cat flap.
You can install the cat flap yourself on the door made of wood or uPVC if you are confident with the use of a jigsaw. Ensure that you do not cut through any of the door mullions or vertical rails. You can use a Jigsaw to cut your panel into a square or circle, depending on how you want it. Remember to take your time and don’t try to force the jigsaw into cutting faster.
After the hole has been cut and the flap is firmly positioned, carefully place the flap of cat food into its new home and make sure that it is firmly secured. If the flap is fitted with screw caps, push them onto the protruding bolts. Once the screws have been installed then sand the rough edges and seal any gaps. This will block drafts from entering your home.
Install the Flap
If you have an ordinary cat flap, you can encourage your pet to go through it by placing a small amount cat food on the top of the door. You can also try pushing the cat with sticks or your hand. Once your cat is accustomed to walking through the flap, it should be able to go in and out as it wishes, so you can let it out and in without having to be there holding the door open to allow it in all day (and possibly in any weather).
It is possible to install an animal flap into an UPVC door or glass door, but it might not be as easy as installing one in a wooden external door. This is due to the fact that UPVC doors and some types of glass doors don’t have an even thickness. This could have a significant impact on the way you cut the hole for the flap and can also affect whether your flap is fitted correctly after it has been installed.
The mounting kit might include a template that shows you the best places to drill holes. If the kit does not include a template you can create one yourself. It is important not to use the jigsaw to hard when cutting, so that it doesn’t leave a bigger than necessary hole in your door.
Some cat flaps come in circular shapes, which are more difficult to put in. If you have a circular flap, make sure the hole is in the correct place on your door. If not, your cat may not be able use it, and may be stuck outside the whole day (or night).
Some cat flaps have locks that allow you to control the time your cat comes and goes. These are very helpful when you’re concerned about your cat going out at night only to come back in because of the darkness, or you’re at work for the entire day. The lock can be used for entry or exit and some are locked in both directions, which allows you to close the door completely. This is especially beneficial for older or ill cats who don’t want to go out in bad weather.