-
cardcello9 zveřejnil aktualizaci před 5 měsíců, 3 týdny
How to Replace Door Locks
It can be difficult to change your door lock. It is essential to protect your home from burglars. It is also advisable to change your locks when you move in with an additional housemate or if you rent your house.
The majority of new locks are designed to fit standard width doors. If your door is wider, you will require a “thick door” kit that has longer screws as well as a longer tail piece for the deadbolt.
Removal of the old lock
You’ll need to take your old door lock from the door before you install the new lock. You can do this with a few simple tools, but you must be careful not to scratch your door frame or door. Making use of the right tools will save you money on repairs in the future.
Start by removing the screws that hold the handle and then trim. You can use a screwdriver do this. Once the screws have been removed, you can take off the trim. You can then access the screw that holds the handle and trim to the door. After removing the screw you can lift the handle and remove the lock cylinder from the door.
If you are unable to move your key inside, this is a sign that the lock is failing. This is because the tumblers are getting worn out and will eventually stop moving up or down making it impossible for the lock to function. It is necessary to have the lock rekeyed by a locksmith if this happens.
Start by removing the screws holding the faceplate to its place. If your kit does not include new screws, you can purchase them at the hardware store. If you are installing a mortise locking you’ll also have to remove the screws holding the external roseplate to the door. After you’ve removed all screws, take the plate and dead bolt from the door.
Next, look for a pinhole on the handle trim inside. If you find one, slip straightened safety pins into it. You could also try the flat screwdriver against an opening or slot. This will release the lock handle and expose screws which can be removed in order to remove the entire lock from the door.
Installing the new lock
Installing a new lock could be accomplished easily regardless of whether you need to replace your lock following an attack, or simply want to change your door’s appearance. However, it is essential to measure your door to ensure that you buy the right lock that is the right size for your door. This is particularly crucial for deadbolt locks, as they require a specific size to fit in the bolt pocket and strike plate. If you’re unsure of how to measure, seek help from your local hardware store or locksmith.
If you’re replacing mortice locks, make use of the existing centre rail as a reference for the positioning of the new mortise lock. Once you have marked the location of the lock, drill holes along the centre line to the same size as the lock. Then, you can chisel the wood until you have a clean rectangular space for your mortice lock to fit into. Install the lock, and then outline the faceplate using a marking blade. Mark and drill screwholes to fix the faceplate.
When rekeying locks you can save money by purchasing a starter kit which includes a set of re-keyable keys and a blank key. Repair My Windows And Doors are available at a variety of online stores as well as hardware and home improvement stores. They also come with a set instructions that should help you complete the task.
If you’re renting, be sure to read your lease agreement before changing locks. You may have to give your landlord the key to the new locks. If so, you might be required to take out the old lock and replace it with a standard lock. You can purchase a standard lock from your local hardware store, or get a high-tech smart lock that connects to your home’s Wi-Fi and allows you to lock and unlock your door from afar. Schlage Smart Lock is compatible with all levers and knobs. This lock can be connected to a security hub for your home to allow you to receive notifications whenever your door is not locked or opened.
Installing a new lock
A damaged lock poses an enigma for security, which is why it’s important to replace it as quickly as possible. The good news is that replacing the door lock is a simple project that anyone can tackle. The first step is to take the lock that was previously installed from the door. The screws holding it in place are removed and the lock is pulled out. Depending on the kind of lock you have, you might need an Allen wrench or a screwdriver. Once you have removed the old lock keep all parts and put them in a safe place.
Then, you can install the new lock on the door. Most kits include an example of cardboard that shows how the lock will fit onto the door. If the template does not fit your door, you can use a pencil to trace around it or use a chisel for extra material removal. Once the new lock is installed, ensure that the latch plate’s interior aligns with the mortise hole for an ideal fit.
When you install the new lock, be careful not to over tighten it. This can cause the lock to crack or even break. If you have a lock keyed, make sure the spindle is aligned with the hole on the knob. If it’s not, use the screwdriver to push through the lock into the knob.
Install the decorative baseplate that is included with the lock once you’ve installed it. If the lock doesn’t come with a base plate that is decorative, you can buy one that matches the hardware.
The final step is to test the new lock to ensure it is working. You can do this by inserting the key into the lock and turning it so that it opens. If this doesn’t work, you must call a locksmith.
You can also stop burglaries by having a professional change the locks’ keys. This involves changing the internal tumblers on your locks to make it unreceptive to the keys you have previously used. This will keep your home safe and provide you with peace of mind.
Test the new lock
If you’re installing a new lock you want to make sure that it functions as you intended. It is essential to follow the instructions. You may not be able to unlock your door if you don’t. You can contact an expert locksmith for help when you’re not sure what to do. A locksmith can also provide guidance on the best locks for your home.
If you’re having difficulty opening your lock it could be an issue with the latch or handle. You can either lubricate your latch with graphite, or spray it with WD-40. In some instances it will resolve the issue. However, you may need to replace the latch completely if it’s no longer working correctly.
Another possibility is that the lock was installed incorrectly. The door handle clip could be damaged or gone from the new lock. In this instance, you should grasp the handle from the inside and then insert an additional plastic retainer clip. After that, connect the handle to the lock and test its operation.
It’s crucial to check the keypad after replacing the lock to make sure it works correctly. You can test the keypad by inserting it and turning it. If the keypad is functioning correctly, it should be able to unlock and lock your door.
You should also check the deadbolt lock to determine whether it’s operating properly. If it isn’t then you must remove the latch and undo the Phillips head screws on the sides of the door to release it. Replace the deadbolt you have used with the new one. The deadbolt should be oriented and loaded lock correctly.
Another way to test the new lock is to perform the spindle test, which can be accomplished by inserting the spindle with a screwdriver. This test should be performed before reinstalling the lock to ensure that there aren’t any mistakes.